Misunderstanding of Powder coating equipment assembly line for electrostatic coating equipment

I. improper selection of automatic coating equipment

Due to the different requirements of the product, the equipment selection is different, and all kinds of coating equipment has its advantages, but also has its shortcomings. The design can not be explained to the user, found after the manufacture is not satisfied. For example, dusting, drying, air curtain insulation, cleanliness requirements of the workpiece is not installed purification equipment. This type of error is the most common error in the layout of the coating equipment.

Two, automatic coating equipment output can not reach

Some designs do not consider the coating equipment hanging way, does not consider the hanging spacing, does not consider the downhill, the horizontal turn interference, the production time, does not consider the reject rate, the coating equipment utilization rate, the product peak production capacity. Resulting in production not up to design guidelines.

Three, automatic coating equipment product process time is not enough

Four 、 the design of the conveyor line of the automatic coating equipment is not proper

There are many ways to transport workpieces, and improper design will have bad effects on production capacity, process operation, and up and down parts. Common suspension chain transportation, its load capacity, traction capacity, both need to be calculated and interference drawing. The speed of the chain also needs corresponding equipment. The coating equipment also requires the stability and synchronism of the chain.